MTL5531 Vibration Transducer Interface MTL5531 Safe Barriers




 

MTL5531 Vibration Transducer Interface MTL5531 Safe Barriers
 

MTL5531 repeats a signal from a vibration sensor in a hazardous area, providing an output for a monitoring system in the safe area. The interface is compatible with 3-wire eddy-current probes and accelerometers or 2-wire current sensors; the selection is made by a switch on the side of the module.

 

SPECIFICATION of MTL5531 Vibration Transducer Interface MTL5531 Safe Barriers
 

See also common specification

Number of channels

One

Sensor type

2- or 3-wire vibration transducer

Location of signal source

Zone 0, IIC, T4–6 hazardous area if suitably certified

Div. 1, Group A hazardous location

Hazardous-area input

Input impedance

(terminals 2 & 3): 10kΩ

Transducer supply voltage, 3-wire (terminals 3 & 1)

Transducer supply current, 2-wire

3.3mA (nom.) for 2-wire sensors, user selectable by switch

Signal range

Minimum –20V, maximum –0.5V

DC transfer accuracy at 20°C

<±50mV

AC transfer accuracy at 20°C

0Hz to 1kHz: ±1%

1kHz to 10kHz: –5% to +1%

10kHz to 20kHz: –10% to +1%

Temperature coefficient

±50ppm/°C (10 to 65°C)

±100ppm/°C (–20 to 10°C)

Voltage bandwidth

–3dB at 47kHz (typical)

Phase response

<14μs, equivalent to:

–1° at 200Hz

–3° at 600Hz

–5° at 1kHz

–50° at 10kHz

–100° at 20kHz

Safe-area output impedance

<20Ω


MTL5531 Vibration Transducer Interface MTL5531 Safe Barriers
 

The MTL5500 range modules are versatile yet simple to apply; use the latest technology and yet are well proven.
 

These contrasting attributes stem from the progression of our expertise in the design and manufacture of isolators for intrinsic safety and the application of innovative technology to achieve the required separation and segregation of the circuits.

The MTL5500 (DIN-rail mounting) and MTL4500 (backplane mounting) isolators share a common design, differing only in the mechanical mounting and connection methods.

• Compact modular design with DIN rail mounting
• High packing density
• Single and multi-channel I/O modules
• 3-port isolation with low power dissipation
• Compatible with MTL5000
•  

The following modules from the terminated MTL5000 range; MTL5018ac, MTL5314, MTL5051 & MTL5053 have been retained until further notice. Supporting information can now be found in the table below. Click the following links for the:

MTL4500 Series Barriers     MTL5531 Vibration Transducer Interface MTL5531 Safe Barriers

MTL4501-SR, MTL4504, MTL4510, MTL4510B, MTL4511, MTL4513, MTL4514 (B)(D), MTL4516, MTL4516C, MTL4517, MTL4521, MTL4521L, MTL4523, MTL4523L, MTL4523R, MTL4523V, MTL4523VL, MTL4524, MTL4524S, MTL4525, MTL4526, MTL4531, MTL4532, MTL4533, MTL4541, MTL4541A, MTL4541AS, MTL4541B, MTL4541P, MTL4541S, MTL4541T, MTL4544, MTL4544A, MTL4544AS, MTL4544B, MTL4544D, MTL4544S, MTL4546, MTL4546C, MTL4546S, MTL4546Y, MTL4549, MTL4549C, MTL4549Y, MTL4561, MTL4575, MTL4576-RTD, MTL4576-THC, MTL4581